Struct icu::timezone::TimeZoneBcp47Id

#[repr(transparent)]
pub struct TimeZoneBcp47Id(pub TinyAsciiStr<8>);

TimeZone ID in BCP47 format

🚧 This code is considered unstable; it may change at any time, in breaking or non-breaking ways, including in SemVer minor releases. While the serde representation of data structs is guaranteed to be stable, their Rust representation might not be. Use with caution.

Tuple Fields

0: TinyAsciiStr<8>

Implementations

impl TimeZoneBcp47Id

pub const fn unknown() -> TimeZoneBcp47Id

The synthetic Etc/Unknown time zone.

This is the result of parsing unknown zones. It’s important that such parsing does not fail, as new zones are added all the time, and ICU4X might not be up to date.

impl TimeZoneBcp47Id

pub const fn with_offset(self, offset: Option<UtcOffset>) -> TimeZoneInfo<Base>

Associates this TimeZoneBcp47Id with a UTC offset, returning a TimeZoneInfo.

pub const fn without_offset(self) -> TimeZoneInfo<Base>

Converts this TimeZoneBcp47Id into a TimeZoneInfo without an offset.

Methods from Deref<Target = TinyAsciiStr<8>>

pub fn as_str(&self) -> &str

pub fn len(&self) -> usize

pub fn is_empty(&self) -> bool

pub fn as_utf8(&self) -> &[u8]

pub fn all_bytes(&self) -> &[u8; N]

pub fn is_ascii_alphabetic(&self) -> bool

Checks if the value is composed of ASCII alphabetic characters:

• U+0041 ‘A’ ..= U+005A ‘Z’, or
• U+0061 ‘a’ ..= U+007A ‘z’.

Examples

use tinystr::TinyAsciiStr;

let s1: TinyAsciiStr<4> = "Test".parse().expect("Failed to parse.");
let s2: TinyAsciiStr<4> = "Te3t".parse().expect("Failed to parse.");

assert!(s1.is_ascii_alphabetic());
assert!(!s2.is_ascii_alphabetic());

pub fn is_ascii_alphanumeric(&self) -> bool

Checks if the value is composed of ASCII alphanumeric characters:

• U+0041 ‘A’ ..= U+005A ‘Z’, or
• U+0061 ‘a’ ..= U+007A ‘z’, or
• U+0030 ‘0’ ..= U+0039 ‘9’.

Examples

use tinystr::TinyAsciiStr;

let s1: TinyAsciiStr<4> = "A15b".parse().expect("Failed to parse.");
let s2: TinyAsciiStr<4> = "[3@w".parse().expect("Failed to parse.");

assert!(s1.is_ascii_alphanumeric());
assert!(!s2.is_ascii_alphanumeric());

pub fn is_ascii_numeric(&self) -> bool

Checks if the value is composed of ASCII decimal digits:

• U+0030 ‘0’ ..= U+0039 ‘9’.

Examples

use tinystr::TinyAsciiStr;

let s1: TinyAsciiStr<4> = "312".parse().expect("Failed to parse.");
let s2: TinyAsciiStr<4> = "3d".parse().expect("Failed to parse.");

assert!(s1.is_ascii_numeric());
assert!(!s2.is_ascii_numeric());

pub fn is_ascii_lowercase(&self) -> bool

Checks if the value is in ASCII lower case.

All letter characters are checked for case. Non-letter characters are ignored.

Examples

use tinystr::TinyAsciiStr;

let s1: TinyAsciiStr<4> = "teSt".parse().expect("Failed to parse.");
let s2: TinyAsciiStr<4> = "test".parse().expect("Failed to parse.");
let s3: TinyAsciiStr<4> = "001z".parse().expect("Failed to parse.");

assert!(!s1.is_ascii_lowercase());
assert!(s2.is_ascii_lowercase());
assert!(s3.is_ascii_lowercase());

pub fn is_ascii_titlecase(&self) -> bool

Checks if the value is in ASCII title case.

This verifies that the first character is ASCII uppercase and all others ASCII lowercase. Non-letter characters are ignored.

Examples

use tinystr::TinyAsciiStr;

let s1: TinyAsciiStr<4> = "teSt".parse().expect("Failed to parse.");
let s2: TinyAsciiStr<4> = "Test".parse().expect("Failed to parse.");
let s3: TinyAsciiStr<4> = "001z".parse().expect("Failed to parse.");

assert!(!s1.is_ascii_titlecase());
assert!(s2.is_ascii_titlecase());
assert!(s3.is_ascii_titlecase());

pub fn is_ascii_uppercase(&self) -> bool

Checks if the value is in ASCII upper case.

All letter characters are checked for case. Non-letter characters are ignored.

Examples

use tinystr::TinyAsciiStr;

let s1: TinyAsciiStr<4> = "teSt".parse().expect("Failed to parse.");
let s2: TinyAsciiStr<4> = "TEST".parse().expect("Failed to parse.");
let s3: TinyAsciiStr<4> = "001z".parse().expect("Failed to parse.");

assert!(!s1.is_ascii_uppercase());
assert!(s2.is_ascii_uppercase());
assert!(!s3.is_ascii_uppercase());

pub fn is_ascii_alphabetic_lowercase(&self) -> bool

Checks if the value is composed of ASCII alphabetic lower case characters:

• U+0061 ‘a’ ..= U+007A ‘z’,

Examples

use tinystr::TinyAsciiStr;

let s1: TinyAsciiStr<4> = "Test".parse().expect("Failed to parse.");
let s2: TinyAsciiStr<4> = "Te3t".parse().expect("Failed to parse.");
let s3: TinyAsciiStr<4> = "teSt".parse().expect("Failed to parse.");
let s4: TinyAsciiStr<4> = "test".parse().expect("Failed to parse.");
let s5: TinyAsciiStr<4> = "001z".parse().expect("Failed to parse.");

assert!(!s1.is_ascii_alphabetic_lowercase());
assert!(!s2.is_ascii_alphabetic_lowercase());
assert!(!s3.is_ascii_alphabetic_lowercase());
assert!(s4.is_ascii_alphabetic_lowercase());
assert!(!s5.is_ascii_alphabetic_lowercase());

pub fn is_ascii_alphabetic_titlecase(&self) -> bool

Checks if the value is composed of ASCII alphabetic, with the first character being ASCII uppercase, and all others ASCII lowercase.

Examples

use tinystr::TinyAsciiStr;

let s1: TinyAsciiStr<4> = "Test".parse().expect("Failed to parse.");
let s2: TinyAsciiStr<4> = "Te3t".parse().expect("Failed to parse.");
let s3: TinyAsciiStr<4> = "teSt".parse().expect("Failed to parse.");
let s4: TinyAsciiStr<4> = "test".parse().expect("Failed to parse.");
let s5: TinyAsciiStr<4> = "001z".parse().expect("Failed to parse.");

assert!(s1.is_ascii_alphabetic_titlecase());
assert!(!s2.is_ascii_alphabetic_titlecase());
assert!(!s3.is_ascii_alphabetic_titlecase());
assert!(!s4.is_ascii_alphabetic_titlecase());
assert!(!s5.is_ascii_alphabetic_titlecase());

pub fn is_ascii_alphabetic_uppercase(&self) -> bool

Checks if the value is composed of ASCII alphabetic upper case characters:

• U+0041 ‘A’ ..= U+005A ‘Z’,

Examples

use tinystr::TinyAsciiStr;

let s1: TinyAsciiStr<4> = "Test".parse().expect("Failed to parse.");
let s2: TinyAsciiStr<4> = "Te3t".parse().expect("Failed to parse.");
let s3: TinyAsciiStr<4> = "teSt".parse().expect("Failed to parse.");
let s4: TinyAsciiStr<4> = "TEST".parse().expect("Failed to parse.");
let s5: TinyAsciiStr<4> = "001z".parse().expect("Failed to parse.");

assert!(!s1.is_ascii_alphabetic_uppercase());
assert!(!s2.is_ascii_alphabetic_uppercase());
assert!(!s3.is_ascii_alphabetic_uppercase());
assert!(s4.is_ascii_alphabetic_uppercase());
assert!(!s5.is_ascii_alphabetic_uppercase());

Methods from Deref<Target = str>

pub fn len(&self) -> usize

Returns the length of self.

This length is in bytes, not chars or graphemes. In other words, it might not be what a human considers the length of the string.

Examples

let len = "foo".len();
assert_eq!(3, len);

assert_eq!("ƒoo".len(), 4); // fancy f!
assert_eq!("ƒoo".chars().count(), 3);

pub fn is_empty(&self) -> bool

Returns true if self has a length of zero bytes.

Examples

let s = "";
assert!(s.is_empty());

let s = "not empty";
assert!(!s.is_empty());

pub fn is_char_boundary(&self, index: usize) -> bool

Checks that index-th byte is the first byte in a UTF-8 code point sequence or the end of the string.

The start and end of the string (when index == self.len()) are considered to be boundaries.

Returns false if index is greater than self.len().

Examples

let s = "Löwe 老虎 Léopard";
assert!(s.is_char_boundary(0));
// start of `老`
assert!(s.is_char_boundary(6));
assert!(s.is_char_boundary(s.len()));

// second byte of `ö`
assert!(!s.is_char_boundary(2));

// third byte of `老`
assert!(!s.is_char_boundary(8));

pub fn floor_char_boundary(&self, index: usize) -> usize

🔬This is a nightly-only experimental API. (round_char_boundary)

Finds the closest x not exceeding index where is_char_boundary(x) is true.

This method can help you truncate a string so that it’s still valid UTF-8, but doesn’t exceed a given number of bytes. Note that this is done purely at the character level and can still visually split graphemes, even though the underlying characters aren’t split. For example, the emoji 🧑‍🔬 (scientist) could be split so that the string only includes 🧑 (person) instead.

Examples

#![feature(round_char_boundary)]
let s = "❤️🧡💛💚💙💜";
assert_eq!(s.len(), 26);
assert!(!s.is_char_boundary(13));

let closest = s.floor_char_boundary(13);
assert_eq!(closest, 10);
assert_eq!(&s[..closest], "❤️🧡");

pub fn ceil_char_boundary(&self, index: usize) -> usize

🔬This is a nightly-only experimental API. (round_char_boundary)

Finds the closest x not below index where is_char_boundary(x) is true.

If index is greater than the length of the string, this returns the length of the string.

This method is the natural complement to floor_char_boundary. See that method for more details.

Examples

#![feature(round_char_boundary)]
let s = "❤️🧡💛💚💙💜";
assert_eq!(s.len(), 26);
assert!(!s.is_char_boundary(13));

let closest = s.ceil_char_boundary(13);
assert_eq!(closest, 14);
assert_eq!(&s[..closest], "❤️🧡💛");

pub fn as_bytes(&self) -> &[u8]

Converts a string slice to a byte slice. To convert the byte slice back into a string slice, use the from_utf8 function.

Examples

let bytes = "bors".as_bytes();
assert_eq!(b"bors", bytes);

pub fn as_ptr(&self) -> *const u8

Converts a string slice to a raw pointer.

As string slices are a slice of bytes, the raw pointer points to a u8. This pointer will be pointing to the first byte of the string slice.

The caller must ensure that the returned pointer is never written to. If you need to mutate the contents of the string slice, use as_mut_ptr.

Examples

let s = "Hello";
let ptr = s.as_ptr();

pub fn get<I>(&self, i: I) -> Option<&<I as SliceIndex<str>>::Output>

where I: SliceIndex<str>,

Returns a subslice of str.

This is the non-panicking alternative to indexing the str. Returns None whenever equivalent indexing operation would panic.

Examples

let v = String::from("🗻∈🌏");

assert_eq!(Some("🗻"), v.get(0..4));

// indices not on UTF-8 sequence boundaries
assert!(v.get(1..).is_none());
assert!(v.get(..8).is_none());

// out of bounds
assert!(v.get(..42).is_none());

pub unsafe fn get_unchecked<I>(&self, i: I) -> &<I as SliceIndex<str>>::Output

where I: SliceIndex<str>,

Returns an unchecked subslice of str.

This is the unchecked alternative to indexing the str.

Safety

Callers of this function are responsible that these preconditions are satisfied:

• The starting index must not exceed the ending index;
• Indexes must be within bounds of the original slice;
• Indexes must lie on UTF-8 sequence boundaries.

Failing that, the returned string slice may reference invalid memory or violate the invariants communicated by the str type.

Examples

let v = "🗻∈🌏";
unsafe {
    assert_eq!("🗻", v.get_unchecked(0..4));
    assert_eq!("∈", v.get_unchecked(4..7));
    assert_eq!("🌏", v.get_unchecked(7..11));
}

pub unsafe fn slice_unchecked(&self, begin: usize, end: usize) -> &str

👎Deprecated since 1.29.0: use get_unchecked(begin..end) instead

Creates a string slice from another string slice, bypassing safety checks.

This is generally not recommended, use with caution! For a safe alternative see str and Index.

This new slice goes from begin to end, including begin but excluding end.

To get a mutable string slice instead, see the slice_mut_unchecked method.

Safety

Callers of this function are responsible that three preconditions are satisfied:

• begin must not exceed end.
• begin and end must be byte positions within the string slice.
• begin and end must lie on UTF-8 sequence boundaries.

Examples

let s = "Löwe 老虎 Léopard";

unsafe {
    assert_eq!("Löwe 老虎 Léopard", s.slice_unchecked(0, 21));
}

let s = "Hello, world!";

unsafe {
    assert_eq!("world", s.slice_unchecked(7, 12));
}

pub fn split_at(&self, mid: usize) -> (&str, &str)

Divides one string slice into two at an index.

The argument, mid, should be a byte offset from the start of the string. It must also be on the boundary of a UTF-8 code point.

The two slices returned go from the start of the string slice to mid, and from mid to the end of the string slice.

To get mutable string slices instead, see the split_at_mut method.

Panics

Panics if mid is not on a UTF-8 code point boundary, or if it is past the end of the last code point of the string slice. For a non-panicking alternative see split_at_checked.

Examples

let s = "Per Martin-Löf";

let (first, last) = s.split_at(3);

assert_eq!("Per", first);
assert_eq!(" Martin-Löf", last);

pub fn split_at_checked(&self, mid: usize) -> Option<(&str, &str)>

Divides one string slice into two at an index.

The argument, mid, should be a valid byte offset from the start of the string. It must also be on the boundary of a UTF-8 code point. The method returns None if that’s not the case.

The two slices returned go from the start of the string slice to mid, and from mid to the end of the string slice.

To get mutable string slices instead, see the split_at_mut_checked method.

Examples

let s = "Per Martin-Löf";

let (first, last) = s.split_at_checked(3).unwrap();
assert_eq!("Per", first);
assert_eq!(" Martin-Löf", last);

assert_eq!(None, s.split_at_checked(13));  // Inside “ö”
assert_eq!(None, s.split_at_checked(16));  // Beyond the string length

pub fn chars(&self) -> Chars<'_>

Returns an iterator over the chars of a string slice.

As a string slice consists of valid UTF-8, we can iterate through a string slice by char. This method returns such an iterator.

It’s important to remember that char represents a Unicode Scalar Value, and might not match your idea of what a ‘character’ is. Iteration over grapheme clusters may be what you actually want. This functionality is not provided by Rust’s standard library, check crates.io instead.

Examples

Basic usage:

let word = "goodbye";

let count = word.chars().count();
assert_eq!(7, count);

let mut chars = word.chars();

assert_eq!(Some('g'), chars.next());
assert_eq!(Some('o'), chars.next());
assert_eq!(Some('o'), chars.next());
assert_eq!(Some('d'), chars.next());
assert_eq!(Some('b'), chars.next());
assert_eq!(Some('y'), chars.next());
assert_eq!(Some('e'), chars.next());

assert_eq!(None, chars.next());

Remember, chars might not match your intuition about characters:

let y = "y̆";

let mut chars = y.chars();

assert_eq!(Some('y'), chars.next()); // not 'y̆'
assert_eq!(Some('\u{0306}'), chars.next());

assert_eq!(None, chars.next());

pub fn char_indices(&self) -> CharIndices<'_>

Returns an iterator over the chars of a string slice, and their positions.

As a string slice consists of valid UTF-8, we can iterate through a string slice by char. This method returns an iterator of both these chars, as well as their byte positions.

The iterator yields tuples. The position is first, the char is second.

Examples

Basic usage:

let word = "goodbye";

let count = word.char_indices().count();
assert_eq!(7, count);

let mut char_indices = word.char_indices();

assert_eq!(Some((0, 'g')), char_indices.next());
assert_eq!(Some((1, 'o')), char_indices.next());
assert_eq!(Some((2, 'o')), char_indices.next());
assert_eq!(Some((3, 'd')), char_indices.next());
assert_eq!(Some((4, 'b')), char_indices.next());
assert_eq!(Some((5, 'y')), char_indices.next());
assert_eq!(Some((6, 'e')), char_indices.next());

assert_eq!(None, char_indices.next());

Remember, chars might not match your intuition about characters:

let yes = "y̆es";

let mut char_indices = yes.char_indices();

assert_eq!(Some((0, 'y')), char_indices.next()); // not (0, 'y̆')
assert_eq!(Some((1, '\u{0306}')), char_indices.next());

// note the 3 here - the previous character took up two bytes
assert_eq!(Some((3, 'e')), char_indices.next());
assert_eq!(Some((4, 's')), char_indices.next());

assert_eq!(None, char_indices.next());

pub fn bytes(&self) -> Bytes<'_>

Returns an iterator over the bytes of a string slice.

As a string slice consists of a sequence of bytes, we can iterate through a string slice by byte. This method returns such an iterator.

Examples

let mut bytes = "bors".bytes();

assert_eq!(Some(b'b'), bytes.next());
assert_eq!(Some(b'o'), bytes.next());
assert_eq!(Some(b'r'), bytes.next());
assert_eq!(Some(b's'), bytes.next());

assert_eq!(None, bytes.next());

pub fn split_whitespace(&self) -> SplitWhitespace<'_>

Splits a string slice by whitespace.

The iterator returned will return string slices that are sub-slices of the original string slice, separated by any amount of whitespace.

‘Whitespace’ is defined according to the terms of the Unicode Derived Core Property White_Space. If you only want to split on ASCII whitespace instead, use split_ascii_whitespace.

Examples

Basic usage:

let mut iter = "A few words".split_whitespace();

assert_eq!(Some("A"), iter.next());
assert_eq!(Some("few"), iter.next());
assert_eq!(Some("words"), iter.next());

assert_eq!(None, iter.next());

All kinds of whitespace are considered:

let mut iter = " Mary   had\ta\u{2009}little  \n\t lamb".split_whitespace();
assert_eq!(Some("Mary"), iter.next());
assert_eq!(Some("had"), iter.next());
assert_eq!(Some("a"), iter.next());
assert_eq!(Some("little"), iter.next());
assert_eq!(Some("lamb"), iter.next());

assert_eq!(None, iter.next());

If the string is empty or all whitespace, the iterator yields no string slices:

assert_eq!("".split_whitespace().next(), None);
assert_eq!("   ".split_whitespace().next(), None);

pub fn split_ascii_whitespace(&self) -> SplitAsciiWhitespace<'_>

Splits a string slice by ASCII whitespace.

The iterator returned will return string slices that are sub-slices of the original string slice, separated by any amount of ASCII whitespace.

To split by Unicode Whitespace instead, use split_whitespace.

Examples

Basic usage:

let mut iter = "A few words".split_ascii_whitespace();

assert_eq!(Some("A"), iter.next());
assert_eq!(Some("few"), iter.next());
assert_eq!(Some("words"), iter.next());

assert_eq!(None, iter.next());

All kinds of ASCII whitespace are considered:

let mut iter = " Mary   had\ta little  \n\t lamb".split_ascii_whitespace();
assert_eq!(Some("Mary"), iter.next());
assert_eq!(Some("had"), iter.next());
assert_eq!(Some("a"), iter.next());
assert_eq!(Some("little"), iter.next());
assert_eq!(Some("lamb"), iter.next());

assert_eq!(None, iter.next());

If the string is empty or all ASCII whitespace, the iterator yields no string slices:

assert_eq!("".split_ascii_whitespace().next(), None);
assert_eq!("   ".split_ascii_whitespace().next(), None);

pub fn lines(&self) -> Lines<'_>

Returns an iterator over the lines of a string, as string slices.

Lines are split at line endings that are either newlines (\n) or sequences of a carriage return followed by a line feed (\r\n).

Line terminators are not included in the lines returned by the iterator.

Note that any carriage return (\r) not immediately followed by a line feed (\n) does not split a line. These carriage returns are thereby included in the produced lines.

The final line ending is optional. A string that ends with a final line ending will return the same lines as an otherwise identical string without a final line ending.

Examples

Basic usage:

let text = "foo\r\nbar\n\nbaz\r";
let mut lines = text.lines();

assert_eq!(Some("foo"), lines.next());
assert_eq!(Some("bar"), lines.next());
assert_eq!(Some(""), lines.next());
// Trailing carriage return is included in the last line
assert_eq!(Some("baz\r"), lines.next());

assert_eq!(None, lines.next());

The final line does not require any ending:

let text = "foo\nbar\n\r\nbaz";
let mut lines = text.lines();

assert_eq!(Some("foo"), lines.next());
assert_eq!(Some("bar"), lines.next());
assert_eq!(Some(""), lines.next());
assert_eq!(Some("baz"), lines.next());

assert_eq!(None, lines.next());

pub fn lines_any(&self) -> LinesAny<'_>

👎Deprecated since 1.4.0: use lines() instead now

Returns an iterator over the lines of a string.

pub fn encode_utf16(&self) -> EncodeUtf16<'_>

Returns an iterator of u16 over the string encoded as UTF-16.

Examples

let text = "Zażółć gęślą jaźń";

let utf8_len = text.len();
let utf16_len = text.encode_utf16().count();

assert!(utf16_len <= utf8_len);

pub fn contains<P>(&self, pat: P) -> bool

where P: Pattern,

Returns true if the given pattern matches a sub-slice of this string slice.

Returns false if it does not.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Examples

let bananas = "bananas";

assert!(bananas.contains("nana"));
assert!(!bananas.contains("apples"));

pub fn starts_with<P>(&self, pat: P) -> bool

where P: Pattern,

Returns true if the given pattern matches a prefix of this string slice.

Returns false if it does not.

The pattern can be a &str, in which case this function will return true if the &str is a prefix of this string slice.

The pattern can also be a char, a slice of chars, or a function or closure that determines if a character matches. These will only be checked against the first character of this string slice. Look at the second example below regarding behavior for slices of chars.

Examples

let bananas = "bananas";

assert!(bananas.starts_with("bana"));
assert!(!bananas.starts_with("nana"));

let bananas = "bananas";

// Note that both of these assert successfully.
assert!(bananas.starts_with(&['b', 'a', 'n', 'a']));
assert!(bananas.starts_with(&['a', 'b', 'c', 'd']));

pub fn ends_with<P>(&self, pat: P) -> bool

where P: Pattern, <P as Pattern>::Searcher<'a>: for<'a> ReverseSearcher<'a>,

Returns true if the given pattern matches a suffix of this string slice.

Returns false if it does not.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Examples

let bananas = "bananas";

assert!(bananas.ends_with("anas"));
assert!(!bananas.ends_with("nana"));

pub fn find<P>(&self, pat: P) -> Option<usize>

where P: Pattern,

Returns the byte index of the first character of this string slice that matches the pattern.

Returns None if the pattern doesn’t match.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Examples

Simple patterns:

let s = "Löwe 老虎 Léopard Gepardi";

assert_eq!(s.find('L'), Some(0));
assert_eq!(s.find('é'), Some(14));
assert_eq!(s.find("pard"), Some(17));

More complex patterns using point-free style and closures:

let s = "Löwe 老虎 Léopard";

assert_eq!(s.find(char::is_whitespace), Some(5));
assert_eq!(s.find(char::is_lowercase), Some(1));
assert_eq!(s.find(|c: char| c.is_whitespace() || c.is_lowercase()), Some(1));
assert_eq!(s.find(|c: char| (c < 'o') && (c > 'a')), Some(4));

Not finding the pattern:

let s = "Löwe 老虎 Léopard";
let x: &[_] = &['1', '2'];

assert_eq!(s.find(x), None);

pub fn rfind<P>(&self, pat: P) -> Option<usize>

where P: Pattern, <P as Pattern>::Searcher<'a>: for<'a> ReverseSearcher<'a>,

Returns the byte index for the first character of the last match of the pattern in this string slice.

Returns None if the pattern doesn’t match.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Examples

Simple patterns:

let s = "Löwe 老虎 Léopard Gepardi";

assert_eq!(s.rfind('L'), Some(13));
assert_eq!(s.rfind('é'), Some(14));
assert_eq!(s.rfind("pard"), Some(24));

More complex patterns with closures:

let s = "Löwe 老虎 Léopard";

assert_eq!(s.rfind(char::is_whitespace), Some(12));
assert_eq!(s.rfind(char::is_lowercase), Some(20));

Not finding the pattern:

let s = "Löwe 老虎 Léopard";
let x: &[_] = &['1', '2'];

assert_eq!(s.rfind(x), None);

pub fn split<P>(&self, pat: P) -> Split<'_, P>

where P: Pattern,

Returns an iterator over substrings of this string slice, separated by characters matched by a pattern.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Iterator behavior

The returned iterator will be a DoubleEndedIterator if the pattern allows a reverse search and forward/reverse search yields the same elements. This is true for, e.g., char, but not for &str.

If the pattern allows a reverse search but its results might differ from a forward search, the rsplit method can be used.

Examples

Simple patterns:

let v: Vec<&str> = "Mary had a little lamb".split(' ').collect();
assert_eq!(v, ["Mary", "had", "a", "little", "lamb"]);

let v: Vec<&str> = "".split('X').collect();
assert_eq!(v, [""]);

let v: Vec<&str> = "lionXXtigerXleopard".split('X').collect();
assert_eq!(v, ["lion", "", "tiger", "leopard"]);

let v: Vec<&str> = "lion::tiger::leopard".split("::").collect();
assert_eq!(v, ["lion", "tiger", "leopard"]);

let v: Vec<&str> = "abc1def2ghi".split(char::is_numeric).collect();
assert_eq!(v, ["abc", "def", "ghi"]);

let v: Vec<&str> = "lionXtigerXleopard".split(char::is_uppercase).collect();
assert_eq!(v, ["lion", "tiger", "leopard"]);

If the pattern is a slice of chars, split on each occurrence of any of the characters:

let v: Vec<&str> = "2020-11-03 23:59".split(&['-', ' ', ':', '@'][..]).collect();
assert_eq!(v, ["2020", "11", "03", "23", "59"]);

A more complex pattern, using a closure:

let v: Vec<&str> = "abc1defXghi".split(|c| c == '1' || c == 'X').collect();
assert_eq!(v, ["abc", "def", "ghi"]);

If a string contains multiple contiguous separators, you will end up with empty strings in the output:

let x = "||||a||b|c".to_string();
let d: Vec<_> = x.split('|').collect();

assert_eq!(d, &["", "", "", "", "a", "", "b", "c"]);

Contiguous separators are separated by the empty string.

let x = "(///)".to_string();
let d: Vec<_> = x.split('/').collect();

assert_eq!(d, &["(", "", "", ")"]);

Separators at the start or end of a string are neighbored by empty strings.

let d: Vec<_> = "010".split("0").collect();
assert_eq!(d, &["", "1", ""]);

When the empty string is used as a separator, it separates every character in the string, along with the beginning and end of the string.

let f: Vec<_> = "rust".split("").collect();
assert_eq!(f, &["", "r", "u", "s", "t", ""]);

Contiguous separators can lead to possibly surprising behavior when whitespace is used as the separator. This code is correct:

let x = "    a  b c".to_string();
let d: Vec<_> = x.split(' ').collect();

assert_eq!(d, &["", "", "", "", "a", "", "b", "c"]);

It does not give you:

assert_eq!(d, &["a", "b", "c"]);

Use split_whitespace for this behavior.

pub fn split_inclusive<P>(&self, pat: P) -> SplitInclusive<'_, P>

where P: Pattern,

Returns an iterator over substrings of this string slice, separated by characters matched by a pattern.

Differs from the iterator produced by split in that split_inclusive leaves the matched part as the terminator of the substring.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Examples

let v: Vec<&str> = "Mary had a little lamb\nlittle lamb\nlittle lamb."
    .split_inclusive('\n').collect();
assert_eq!(v, ["Mary had a little lamb\n", "little lamb\n", "little lamb."]);

If the last element of the string is matched, that element will be considered the terminator of the preceding substring. That substring will be the last item returned by the iterator.

let v: Vec<&str> = "Mary had a little lamb\nlittle lamb\nlittle lamb.\n"
    .split_inclusive('\n').collect();
assert_eq!(v, ["Mary had a little lamb\n", "little lamb\n", "little lamb.\n"]);

pub fn rsplit<P>(&self, pat: P) -> RSplit<'_, P>

where P: Pattern, <P as Pattern>::Searcher<'a>: for<'a> ReverseSearcher<'a>,

Returns an iterator over substrings of the given string slice, separated by characters matched by a pattern and yielded in reverse order.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Iterator behavior

The returned iterator requires that the pattern supports a reverse search, and it will be a DoubleEndedIterator if a forward/reverse search yields the same elements.

For iterating from the front, the split method can be used.

Examples

Simple patterns:

let v: Vec<&str> = "Mary had a little lamb".rsplit(' ').collect();
assert_eq!(v, ["lamb", "little", "a", "had", "Mary"]);

let v: Vec<&str> = "".rsplit('X').collect();
assert_eq!(v, [""]);

let v: Vec<&str> = "lionXXtigerXleopard".rsplit('X').collect();
assert_eq!(v, ["leopard", "tiger", "", "lion"]);

let v: Vec<&str> = "lion::tiger::leopard".rsplit("::").collect();
assert_eq!(v, ["leopard", "tiger", "lion"]);

A more complex pattern, using a closure:

let v: Vec<&str> = "abc1defXghi".rsplit(|c| c == '1' || c == 'X').collect();
assert_eq!(v, ["ghi", "def", "abc"]);

pub fn split_terminator<P>(&self, pat: P) -> SplitTerminator<'_, P>

where P: Pattern,

Returns an iterator over substrings of the given string slice, separated by characters matched by a pattern.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Equivalent to split, except that the trailing substring is skipped if empty.

This method can be used for string data that is terminated, rather than separated by a pattern.

Iterator behavior

The returned iterator will be a DoubleEndedIterator if the pattern allows a reverse search and forward/reverse search yields the same elements. This is true for, e.g., char, but not for &str.

If the pattern allows a reverse search but its results might differ from a forward search, the rsplit_terminator method can be used.

Examples

let v: Vec<&str> = "A.B.".split_terminator('.').collect();
assert_eq!(v, ["A", "B"]);

let v: Vec<&str> = "A..B..".split_terminator(".").collect();
assert_eq!(v, ["A", "", "B", ""]);

let v: Vec<&str> = "A.B:C.D".split_terminator(&['.', ':'][..]).collect();
assert_eq!(v, ["A", "B", "C", "D"]);

pub fn rsplit_terminator<P>(&self, pat: P) -> RSplitTerminator<'_, P>

where P: Pattern, <P as Pattern>::Searcher<'a>: for<'a> ReverseSearcher<'a>,

Returns an iterator over substrings of self, separated by characters matched by a pattern and yielded in reverse order.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Equivalent to split, except that the trailing substring is skipped if empty.

This method can be used for string data that is terminated, rather than separated by a pattern.

Iterator behavior

The returned iterator requires that the pattern supports a reverse search, and it will be double ended if a forward/reverse search yields the same elements.

For iterating from the front, the split_terminator method can be used.

Examples

let v: Vec<&str> = "A.B.".rsplit_terminator('.').collect();
assert_eq!(v, ["B", "A"]);

let v: Vec<&str> = "A..B..".rsplit_terminator(".").collect();
assert_eq!(v, ["", "B", "", "A"]);

let v: Vec<&str> = "A.B:C.D".rsplit_terminator(&['.', ':'][..]).collect();
assert_eq!(v, ["D", "C", "B", "A"]);

pub fn splitn<P>(&self, n: usize, pat: P) -> SplitN<'_, P>

where P: Pattern,

Returns an iterator over substrings of the given string slice, separated by a pattern, restricted to returning at most n items.

If n substrings are returned, the last substring (the nth substring) will contain the remainder of the string.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Iterator behavior

The returned iterator will not be double ended, because it is not efficient to support.

If the pattern allows a reverse search, the rsplitn method can be used.

Examples

Simple patterns:

let v: Vec<&str> = "Mary had a little lambda".splitn(3, ' ').collect();
assert_eq!(v, ["Mary", "had", "a little lambda"]);

let v: Vec<&str> = "lionXXtigerXleopard".splitn(3, "X").collect();
assert_eq!(v, ["lion", "", "tigerXleopard"]);

let v: Vec<&str> = "abcXdef".splitn(1, 'X').collect();
assert_eq!(v, ["abcXdef"]);

let v: Vec<&str> = "".splitn(1, 'X').collect();
assert_eq!(v, [""]);

A more complex pattern, using a closure:

let v: Vec<&str> = "abc1defXghi".splitn(2, |c| c == '1' || c == 'X').collect();
assert_eq!(v, ["abc", "defXghi"]);

pub fn rsplitn<P>(&self, n: usize, pat: P) -> RSplitN<'_, P>

where P: Pattern, <P as Pattern>::Searcher<'a>: for<'a> ReverseSearcher<'a>,

Returns an iterator over substrings of this string slice, separated by a pattern, starting from the end of the string, restricted to returning at most n items.

If n substrings are returned, the last substring (the nth substring) will contain the remainder of the string.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Iterator behavior

The returned iterator will not be double ended, because it is not efficient to support.

For splitting from the front, the splitn method can be used.

Examples

Simple patterns:

let v: Vec<&str> = "Mary had a little lamb".rsplitn(3, ' ').collect();
assert_eq!(v, ["lamb", "little", "Mary had a"]);

let v: Vec<&str> = "lionXXtigerXleopard".rsplitn(3, 'X').collect();
assert_eq!(v, ["leopard", "tiger", "lionX"]);

let v: Vec<&str> = "lion::tiger::leopard".rsplitn(2, "::").collect();
assert_eq!(v, ["leopard", "lion::tiger"]);

A more complex pattern, using a closure:

let v: Vec<&str> = "abc1defXghi".rsplitn(2, |c| c == '1' || c == 'X').collect();
assert_eq!(v, ["ghi", "abc1def"]);

pub fn split_once<P>(&self, delimiter: P) -> Option<(&str, &str)>

where P: Pattern,

Splits the string on the first occurrence of the specified delimiter and returns prefix before delimiter and suffix after delimiter.

Examples

assert_eq!("cfg".split_once('='), None);
assert_eq!("cfg=".split_once('='), Some(("cfg", "")));
assert_eq!("cfg=foo".split_once('='), Some(("cfg", "foo")));
assert_eq!("cfg=foo=bar".split_once('='), Some(("cfg", "foo=bar")));

pub fn rsplit_once<P>(&self, delimiter: P) -> Option<(&str, &str)>

where P: Pattern, <P as Pattern>::Searcher<'a>: for<'a> ReverseSearcher<'a>,

Splits the string on the last occurrence of the specified delimiter and returns prefix before delimiter and suffix after delimiter.

Examples

assert_eq!("cfg".rsplit_once('='), None);
assert_eq!("cfg=foo".rsplit_once('='), Some(("cfg", "foo")));
assert_eq!("cfg=foo=bar".rsplit_once('='), Some(("cfg=foo", "bar")));

pub fn matches<P>(&self, pat: P) -> Matches<'_, P>

where P: Pattern,

Returns an iterator over the disjoint matches of a pattern within the given string slice.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Iterator behavior

The returned iterator will be a DoubleEndedIterator if the pattern allows a reverse search and forward/reverse search yields the same elements. This is true for, e.g., char, but not for &str.

If the pattern allows a reverse search but its results might differ from a forward search, the rmatches method can be used.

Examples

let v: Vec<&str> = "abcXXXabcYYYabc".matches("abc").collect();
assert_eq!(v, ["abc", "abc", "abc"]);

let v: Vec<&str> = "1abc2abc3".matches(char::is_numeric).collect();
assert_eq!(v, ["1", "2", "3"]);

pub fn rmatches<P>(&self, pat: P) -> RMatches<'_, P>

where P: Pattern, <P as Pattern>::Searcher<'a>: for<'a> ReverseSearcher<'a>,

Returns an iterator over the disjoint matches of a pattern within this string slice, yielded in reverse order.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Iterator behavior

The returned iterator requires that the pattern supports a reverse search, and it will be a DoubleEndedIterator if a forward/reverse search yields the same elements.

For iterating from the front, the matches method can be used.

Examples

let v: Vec<&str> = "abcXXXabcYYYabc".rmatches("abc").collect();
assert_eq!(v, ["abc", "abc", "abc"]);

let v: Vec<&str> = "1abc2abc3".rmatches(char::is_numeric).collect();
assert_eq!(v, ["3", "2", "1"]);

pub fn match_indices<P>(&self, pat: P) -> MatchIndices<'_, P>

where P: Pattern,

Returns an iterator over the disjoint matches of a pattern within this string slice as well as the index that the match starts at.

For matches of pat within self that overlap, only the indices corresponding to the first match are returned.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Iterator behavior

The returned iterator will be a DoubleEndedIterator if the pattern allows a reverse search and forward/reverse search yields the same elements. This is true for, e.g., char, but not for &str.

If the pattern allows a reverse search but its results might differ from a forward search, the rmatch_indices method can be used.

Examples

let v: Vec<_> = "abcXXXabcYYYabc".match_indices("abc").collect();
assert_eq!(v, [(0, "abc"), (6, "abc"), (12, "abc")]);

let v: Vec<_> = "1abcabc2".match_indices("abc").collect();
assert_eq!(v, [(1, "abc"), (4, "abc")]);

let v: Vec<_> = "ababa".match_indices("aba").collect();
assert_eq!(v, [(0, "aba")]); // only the first `aba`

pub fn rmatch_indices<P>(&self, pat: P) -> RMatchIndices<'_, P>

where P: Pattern, <P as Pattern>::Searcher<'a>: for<'a> ReverseSearcher<'a>,

Returns an iterator over the disjoint matches of a pattern within self, yielded in reverse order along with the index of the match.

For matches of pat within self that overlap, only the indices corresponding to the last match are returned.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Iterator behavior

The returned iterator requires that the pattern supports a reverse search, and it will be a DoubleEndedIterator if a forward/reverse search yields the same elements.

For iterating from the front, the match_indices method can be used.

Examples

let v: Vec<_> = "abcXXXabcYYYabc".rmatch_indices("abc").collect();
assert_eq!(v, [(12, "abc"), (6, "abc"), (0, "abc")]);

let v: Vec<_> = "1abcabc2".rmatch_indices("abc").collect();
assert_eq!(v, [(4, "abc"), (1, "abc")]);

let v: Vec<_> = "ababa".rmatch_indices("aba").collect();
assert_eq!(v, [(2, "aba")]); // only the last `aba`

pub fn trim(&self) -> &str

Returns a string slice with leading and trailing whitespace removed.

‘Whitespace’ is defined according to the terms of the Unicode Derived Core Property White_Space, which includes newlines.

Examples

let s = "\n Hello\tworld\t\n";

assert_eq!("Hello\tworld", s.trim());

pub fn trim_start(&self) -> &str

Returns a string slice with leading whitespace removed.

‘Whitespace’ is defined according to the terms of the Unicode Derived Core Property White_Space, which includes newlines.

Text directionality

A string is a sequence of bytes. start in this context means the first position of that byte string; for a left-to-right language like English or Russian, this will be left side, and for right-to-left languages like Arabic or Hebrew, this will be the right side.

Examples

Basic usage:

let s = "\n Hello\tworld\t\n";
assert_eq!("Hello\tworld\t\n", s.trim_start());

Directionality:

let s = "  English  ";
assert!(Some('E') == s.trim_start().chars().next());

let s = "  עברית  ";
assert!(Some('ע') == s.trim_start().chars().next());

pub fn trim_end(&self) -> &str

Returns a string slice with trailing whitespace removed.

‘Whitespace’ is defined according to the terms of the Unicode Derived Core Property White_Space, which includes newlines.

Text directionality

A string is a sequence of bytes. end in this context means the last position of that byte string; for a left-to-right language like English or Russian, this will be right side, and for right-to-left languages like Arabic or Hebrew, this will be the left side.

Examples

Basic usage:

let s = "\n Hello\tworld\t\n";
assert_eq!("\n Hello\tworld", s.trim_end());

Directionality:

let s = "  English  ";
assert!(Some('h') == s.trim_end().chars().rev().next());

let s = "  עברית  ";
assert!(Some('ת') == s.trim_end().chars().rev().next());

pub fn trim_left(&self) -> &str

👎Deprecated since 1.33.0: superseded by trim_start

Returns a string slice with leading whitespace removed.

‘Whitespace’ is defined according to the terms of the Unicode Derived Core Property White_Space.

Text directionality

A string is a sequence of bytes. ‘Left’ in this context means the first position of that byte string; for a language like Arabic or Hebrew which are ‘right to left’ rather than ‘left to right’, this will be the right side, not the left.

Examples

Basic usage:

let s = " Hello\tworld\t";

assert_eq!("Hello\tworld\t", s.trim_left());

Directionality:

let s = "  English";
assert!(Some('E') == s.trim_left().chars().next());

let s = "  עברית";
assert!(Some('ע') == s.trim_left().chars().next());

pub fn trim_right(&self) -> &str

👎Deprecated since 1.33.0: superseded by trim_end

Returns a string slice with trailing whitespace removed.

‘Whitespace’ is defined according to the terms of the Unicode Derived Core Property White_Space.

Text directionality

A string is a sequence of bytes. ‘Right’ in this context means the last position of that byte string; for a language like Arabic or Hebrew which are ‘right to left’ rather than ‘left to right’, this will be the left side, not the right.

Examples

Basic usage:

let s = " Hello\tworld\t";

assert_eq!(" Hello\tworld", s.trim_right());

Directionality:

let s = "English  ";
assert!(Some('h') == s.trim_right().chars().rev().next());

let s = "עברית  ";
assert!(Some('ת') == s.trim_right().chars().rev().next());

pub fn trim_matches<P>(&self, pat: P) -> &str

where P: Pattern, <P as Pattern>::Searcher<'a>: for<'a> DoubleEndedSearcher<'a>,

Returns a string slice with all prefixes and suffixes that match a pattern repeatedly removed.

The pattern can be a char, a slice of chars, or a function or closure that determines if a character matches.

Examples

Simple patterns:

assert_eq!("11foo1bar11".trim_matches('1'), "foo1bar");
assert_eq!("123foo1bar123".trim_matches(char::is_numeric), "foo1bar");

let x: &[_] = &['1', '2'];
assert_eq!("12foo1bar12".trim_matches(x), "foo1bar");

A more complex pattern, using a closure:

assert_eq!("1foo1barXX".trim_matches(|c| c == '1' || c == 'X'), "foo1bar");

pub fn trim_start_matches<P>(&self, pat: P) -> &str

where P: Pattern,

Returns a string slice with all prefixes that match a pattern repeatedly removed.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Text directionality

A string is a sequence of bytes. start in this context means the first position of that byte string; for a left-to-right language like English or Russian, this will be left side, and for right-to-left languages like Arabic or Hebrew, this will be the right side.

Examples

assert_eq!("11foo1bar11".trim_start_matches('1'), "foo1bar11");
assert_eq!("123foo1bar123".trim_start_matches(char::is_numeric), "foo1bar123");

let x: &[_] = &['1', '2'];
assert_eq!("12foo1bar12".trim_start_matches(x), "foo1bar12");

pub fn strip_prefix<P>(&self, prefix: P) -> Option<&str>

where P: Pattern,

Returns a string slice with the prefix removed.

If the string starts with the pattern prefix, returns the substring after the prefix, wrapped in Some. Unlike trim_start_matches, this method removes the prefix exactly once.

If the string does not start with prefix, returns None.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Examples

assert_eq!("foo:bar".strip_prefix("foo:"), Some("bar"));
assert_eq!("foo:bar".strip_prefix("bar"), None);
assert_eq!("foofoo".strip_prefix("foo"), Some("foo"));

pub fn strip_suffix<P>(&self, suffix: P) -> Option<&str>

where P: Pattern, <P as Pattern>::Searcher<'a>: for<'a> ReverseSearcher<'a>,

Returns a string slice with the suffix removed.

If the string ends with the pattern suffix, returns the substring before the suffix, wrapped in Some. Unlike trim_end_matches, this method removes the suffix exactly once.

If the string does not end with suffix, returns None.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Examples

assert_eq!("bar:foo".strip_suffix(":foo"), Some("bar"));
assert_eq!("bar:foo".strip_suffix("bar"), None);
assert_eq!("foofoo".strip_suffix("foo"), Some("foo"));

pub fn trim_end_matches<P>(&self, pat: P) -> &str

where P: Pattern, <P as Pattern>::Searcher<'a>: for<'a> ReverseSearcher<'a>,

Returns a string slice with all suffixes that match a pattern repeatedly removed.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Text directionality

A string is a sequence of bytes. end in this context means the last position of that byte string; for a left-to-right language like English or Russian, this will be right side, and for right-to-left languages like Arabic or Hebrew, this will be the left side.

Examples

Simple patterns:

assert_eq!("11foo1bar11".trim_end_matches('1'), "11foo1bar");
assert_eq!("123foo1bar123".trim_end_matches(char::is_numeric), "123foo1bar");

let x: &[_] = &['1', '2'];
assert_eq!("12foo1bar12".trim_end_matches(x), "12foo1bar");

A more complex pattern, using a closure:

assert_eq!("1fooX".trim_end_matches(|c| c == '1' || c == 'X'), "1foo");

pub fn trim_left_matches<P>(&self, pat: P) -> &str

where P: Pattern,

👎Deprecated since 1.33.0: superseded by trim_start_matches

Returns a string slice with all prefixes that match a pattern repeatedly removed.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Text directionality

A string is a sequence of bytes. ‘Left’ in this context means the first position of that byte string; for a language like Arabic or Hebrew which are ‘right to left’ rather than ‘left to right’, this will be the right side, not the left.

Examples

assert_eq!("11foo1bar11".trim_left_matches('1'), "foo1bar11");
assert_eq!("123foo1bar123".trim_left_matches(char::is_numeric), "foo1bar123");

let x: &[_] = &['1', '2'];
assert_eq!("12foo1bar12".trim_left_matches(x), "foo1bar12");

pub fn trim_right_matches<P>(&self, pat: P) -> &str

where P: Pattern, <P as Pattern>::Searcher<'a>: for<'a> ReverseSearcher<'a>,

👎Deprecated since 1.33.0: superseded by trim_end_matches

Returns a string slice with all suffixes that match a pattern repeatedly removed.

The pattern can be a &str, char, a slice of chars, or a function or closure that determines if a character matches.

Text directionality

A string is a sequence of bytes. ‘Right’ in this context means the last position of that byte string; for a language like Arabic or Hebrew which are ‘right to left’ rather than ‘left to right’, this will be the left side, not the right.

Examples

Simple patterns:

assert_eq!("11foo1bar11".trim_right_matches('1'), "11foo1bar");
assert_eq!("123foo1bar123".trim_right_matches(char::is_numeric), "123foo1bar");

let x: &[_] = &['1', '2'];
assert_eq!("12foo1bar12".trim_right_matches(x), "12foo1bar");

A more complex pattern, using a closure:

assert_eq!("1fooX".trim_right_matches(|c| c == '1' || c == 'X'), "1foo");

pub fn parse<F>(&self) -> Result<F, <F as FromStr>::Err>

where F: FromStr,

Parses this string slice into another type.

Because parse is so general, it can cause problems with type inference. As such, parse is one of the few times you’ll see the syntax affectionately known as the ‘turbofish’: ::<>. This helps the inference algorithm understand specifically which type you’re trying to parse into.

parse can parse into any type that implements the FromStr trait.

Errors

Will return Err if it’s not possible to parse this string slice into the desired type.

Examples

Basic usage

let four: u32 = "4".parse().unwrap();

assert_eq!(4, four);

Using the ‘turbofish’ instead of annotating four:

let four = "4".parse::<u32>();

assert_eq!(Ok(4), four);

Failing to parse:

let nope = "j".parse::<u32>();

assert!(nope.is_err());

pub fn is_ascii(&self) -> bool

Checks if all characters in this string are within the ASCII range.

Examples

let ascii = "hello!\n";
let non_ascii = "Grüße, Jürgen ❤";

assert!(ascii.is_ascii());
assert!(!non_ascii.is_ascii());

pub fn as_ascii(&self) -> Option<&[AsciiChar]>

🔬This is a nightly-only experimental API. (ascii_char)

If this string slice is_ascii, returns it as a slice of ASCII characters, otherwise returns None.

pub fn eq_ignore_ascii_case(&self, other: &str) -> bool

Checks that two strings are an ASCII case-insensitive match.

Same as to_ascii_lowercase(a) == to_ascii_lowercase(b), but without allocating and copying temporaries.

Examples

assert!("Ferris".eq_ignore_ascii_case("FERRIS"));
assert!("Ferrös".eq_ignore_ascii_case("FERRöS"));
assert!(!"Ferrös".eq_ignore_ascii_case("FERRÖS"));

pub fn trim_ascii_start(&self) -> &str

Returns a string slice with leading ASCII whitespace removed.

‘Whitespace’ refers to the definition used by u8::is_ascii_whitespace.

Examples

assert_eq!(" \t \u{3000}hello world\n".trim_ascii_start(), "\u{3000}hello world\n");
assert_eq!("  ".trim_ascii_start(), "");
assert_eq!("".trim_ascii_start(), "");

pub fn trim_ascii_end(&self) -> &str

Returns a string slice with trailing ASCII whitespace removed.

‘Whitespace’ refers to the definition used by u8::is_ascii_whitespace.

Examples

assert_eq!("\r hello world\u{3000}\n ".trim_ascii_end(), "\r hello world\u{3000}");
assert_eq!("  ".trim_ascii_end(), "");
assert_eq!("".trim_ascii_end(), "");

pub fn trim_ascii(&self) -> &str

Returns a string slice with leading and trailing ASCII whitespace removed.

‘Whitespace’ refers to the definition used by u8::is_ascii_whitespace.

Examples

assert_eq!("\r hello world\n ".trim_ascii(), "hello world");
assert_eq!("  ".trim_ascii(), "");
assert_eq!("".trim_ascii(), "");

pub fn escape_debug(&self) -> EscapeDebug<'_>

Returns an iterator that escapes each char in self with char::escape_debug.

Note: only extended grapheme codepoints that begin the string will be escaped.

Examples

As an iterator:

for c in "❤\n!".escape_debug() {
    print!("{c}");
}
println!();

Using println! directly:

println!("{}", "❤\n!".escape_debug());

Both are equivalent to:

println!("❤\\n!");

Using to_string:

assert_eq!("❤\n!".escape_debug().to_string(), "❤\\n!");

pub fn escape_default(&self) -> EscapeDefault<'_>

Returns an iterator that escapes each char in self with char::escape_default.

Examples

As an iterator:

for c in "❤\n!".escape_default() {
    print!("{c}");
}
println!();

Using println! directly:

println!("{}", "❤\n!".escape_default());

Both are equivalent to:

println!("\\u{{2764}}\\n!");

Using to_string:

assert_eq!("❤\n!".escape_default().to_string(), "\\u{2764}\\n!");

pub fn escape_unicode(&self) -> EscapeUnicode<'_>

Returns an iterator that escapes each char in self with char::escape_unicode.

Examples

As an iterator:

for c in "❤\n!".escape_unicode() {
    print!("{c}");
}
println!();

Using println! directly:

println!("{}", "❤\n!".escape_unicode());

Both are equivalent to:

println!("\\u{{2764}}\\u{{a}}\\u{{21}}");

Using to_string:

assert_eq!("❤\n!".escape_unicode().to_string(), "\\u{2764}\\u{a}\\u{21}");

pub fn substr_range(&self, substr: &str) -> Option<Range<usize>>

🔬This is a nightly-only experimental API. (substr_range)

Returns the range that a substring points to.

Returns None if substr does not point within self.

Unlike str::find, this does not search through the string. Instead, it uses pointer arithmetic to find where in the string substr is derived from.

This is useful for extending str::split and similar methods.

Note that this method may return false positives (typically either Some(0..0) or Some(self.len()..self.len())) if substr is a zero-length str that points at the beginning or end of another, independent, str.

Examples

#![feature(substr_range)]

let data = "a, b, b, a";
let mut iter = data.split(", ").map(|s| data.substr_range(s).unwrap());

assert_eq!(iter.next(), Some(0..1));
assert_eq!(iter.next(), Some(3..4));
assert_eq!(iter.next(), Some(6..7));
assert_eq!(iter.next(), Some(9..10));

pub fn replace<P>(&self, from: P, to: &str) -> String

where P: Pattern,

Replaces all matches of a pattern with another string.

replace creates a new String, and copies the data from this string slice into it. While doing so, it attempts to find matches of a pattern. If it finds any, it replaces them with the replacement string slice.

Examples

Basic usage:

let s = "this is old";

assert_eq!("this is new", s.replace("old", "new"));
assert_eq!("than an old", s.replace("is", "an"));

When the pattern doesn’t match, it returns this string slice as String:

let s = "this is old";
assert_eq!(s, s.replace("cookie monster", "little lamb"));

pub fn replacen<P>(&self, pat: P, to: &str, count: usize) -> String

where P: Pattern,

Replaces first N matches of a pattern with another string.

replacen creates a new String, and copies the data from this string slice into it. While doing so, it attempts to find matches of a pattern. If it finds any, it replaces them with the replacement string slice at most count times.

Examples

Basic usage:

let s = "foo foo 123 foo";
assert_eq!("new new 123 foo", s.replacen("foo", "new", 2));
assert_eq!("faa fao 123 foo", s.replacen('o', "a", 3));
assert_eq!("foo foo new23 foo", s.replacen(char::is_numeric, "new", 1));

When the pattern doesn’t match, it returns this string slice as String:

let s = "this is old";
assert_eq!(s, s.replacen("cookie monster", "little lamb", 10));

pub fn to_lowercase(&self) -> String

Returns the lowercase equivalent of this string slice, as a new String.

‘Lowercase’ is defined according to the terms of the Unicode Derived Core Property Lowercase.

Since some characters can expand into multiple characters when changing the case, this function returns a String instead of modifying the parameter in-place.

Examples

Basic usage:

let s = "HELLO";

assert_eq!("hello", s.to_lowercase());

A tricky example, with sigma:

let sigma = "Σ";

assert_eq!("σ", sigma.to_lowercase());

// but at the end of a word, it's ς, not σ:
let odysseus = "ὈΔΥΣΣΕΎΣ";

assert_eq!("ὀδυσσεύς", odysseus.to_lowercase());

Languages without case are not changed:

let new_year = "农历新年";

assert_eq!(new_year, new_year.to_lowercase());

pub fn to_uppercase(&self) -> String

Returns the uppercase equivalent of this string slice, as a new String.

‘Uppercase’ is defined according to the terms of the Unicode Derived Core Property Uppercase.

Since some characters can expand into multiple characters when changing the case, this function returns a String instead of modifying the parameter in-place.

Examples

Basic usage:

let s = "hello";

assert_eq!("HELLO", s.to_uppercase());

Scripts without case are not changed:

let new_year = "农历新年";

assert_eq!(new_year, new_year.to_uppercase());

One character can become multiple:

let s = "tschüß";

assert_eq!("TSCHÜSS", s.to_uppercase());

pub fn repeat(&self, n: usize) -> String

Creates a new String by repeating a string n times.

Panics

This function will panic if the capacity would overflow.

Examples

Basic usage:

assert_eq!("abc".repeat(4), String::from("abcabcabcabc"));

A panic upon overflow:

// this will panic at runtime
let huge = "0123456789abcdef".repeat(usize::MAX);

pub fn to_ascii_uppercase(&self) -> String

Returns a copy of this string where each character is mapped to its ASCII upper case equivalent.

ASCII letters ‘a’ to ‘z’ are mapped to ‘A’ to ‘Z’, but non-ASCII letters are unchanged.

To uppercase the value in-place, use make_ascii_uppercase.

To uppercase ASCII characters in addition to non-ASCII characters, use to_uppercase.

Examples

let s = "Grüße, Jürgen ❤";

assert_eq!("GRüßE, JüRGEN ❤", s.to_ascii_uppercase());

pub fn to_ascii_lowercase(&self) -> String

Returns a copy of this string where each character is mapped to its ASCII lower case equivalent.

ASCII letters ‘A’ to ‘Z’ are mapped to ‘a’ to ‘z’, but non-ASCII letters are unchanged.

To lowercase the value in-place, use make_ascii_lowercase.

To lowercase ASCII characters in addition to non-ASCII characters, use to_lowercase.

Examples

let s = "Grüße, Jürgen ❤";

assert_eq!("grüße, jürgen ❤", s.to_ascii_lowercase());

Trait Implementations

impl AsULE for TimeZoneBcp47Id

type ULE = TimeZoneBcp47Id

The ULE type corresponding to Self.

fn to_unaligned(self) -> <TimeZoneBcp47Id as AsULE>::ULE

Converts from Self to Self::ULE.

fn from_unaligned(unaligned: <TimeZoneBcp47Id as AsULE>::ULE) -> TimeZoneBcp47Id

Converts from Self::ULE to Self.

impl Bake for TimeZoneBcp47Id

fn bake(&self, env: &CrateEnv) -> TokenStream

Returns a TokenStream that would evaluate to self.

impl BakeSize for TimeZoneBcp47Id

fn borrows_size(&self) -> usize

Returns the size

impl Clone for TimeZoneBcp47Id

fn clone(&self) -> TimeZoneBcp47Id

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for TimeZoneBcp47Id

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Deref for TimeZoneBcp47Id

type Target = TinyAsciiStr<8>

The resulting type after dereferencing.

fn deref(&self) -> &<TimeZoneBcp47Id as Deref>::Target

Dereferences the value.

impl<'de> Deserialize<'de> for TimeZoneBcp47Id

fn deserialize<__D>( __deserializer: __D, ) -> Result<TimeZoneBcp47Id, <__D as Deserializer<'de>>::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl<C, A, Z> GetField<TimeZoneBcp47Id> for CustomZonedDateTime<A, Z>

where C: Calendar, A: AsCalendar<Calendar = C>, Z: GetField<TimeZoneBcp47Id>,

fn get_field(&self) -> TimeZoneBcp47Id

Returns the value of this trait’s field T.

impl<O> GetField<TimeZoneBcp47Id> for TimeZoneInfo<O>

where O: TimeZoneModel,

fn get_field(&self) -> TimeZoneBcp47Id

Returns the value of this trait’s field T.

impl Hash for TimeZoneBcp47Id

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl IntoOption<TimeZoneBcp47Id> for TimeZoneBcp47Id

fn into_option(self) -> Option<TimeZoneBcp47Id>

Return self as an Option<T>

impl Ord for TimeZoneBcp47Id

fn cmp(&self, other: &TimeZoneBcp47Id) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq for TimeZoneBcp47Id

fn eq(&self, other: &TimeZoneBcp47Id) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for TimeZoneBcp47Id

fn partial_cmp(&self, other: &TimeZoneBcp47Id) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Serialize for TimeZoneBcp47Id

fn serialize<__S>( &self, __serializer: __S, ) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl ULE for TimeZoneBcp47Id

fn validate_byte_slice(bytes: &[u8]) -> Result<(), UleError>

Validates a byte slice, &[u8].

fn parse_byte_slice(bytes: &[u8]) -> Result<&[Self], UleError>

Parses a byte slice, &[u8], and return it as &[Self] with the same lifetime.

unsafe fn from_byte_slice_unchecked(bytes: &[u8]) -> &[Self]

Takes a byte slice, &[u8], and return it as &[Self] with the same lifetime, assuming that this byte slice has previously been run through Self::parse_byte_slice() with success.

fn as_byte_slice(slice: &[Self]) -> &[u8]

Given &[Self], returns a &[u8] with the same lifetime.

impl<'a> Yokeable<'a> for TimeZoneBcp47Id

where TimeZoneBcp47Id: Sized,

type Output = TimeZoneBcp47Id

This type MUST be Self with the 'static replaced with 'a, i.e. Self<'a>

fn transform(&self) -> &<TimeZoneBcp47Id as Yokeable<'a>>::Output

This method must cast self between &'a Self<'static> and &'a Self<'a>.

fn transform_owned(self) -> <TimeZoneBcp47Id as Yokeable<'a>>::Output

This method must cast self between Self<'static> and Self<'a>.

unsafe fn make( this: <TimeZoneBcp47Id as Yokeable<'a>>::Output, ) -> TimeZoneBcp47Id

This method can be used to cast away Self<'a>’s lifetime.

fn transform_mut<F>(&'a mut self, f: F)

where F: 'static + for<'b> FnOnce(&'b mut <TimeZoneBcp47Id as Yokeable<'a>>::Output),

This method must cast self between &'a mut Self<'static> and &'a mut Self<'a>, and pass it to f.

impl<'a> ZeroMapKV<'a> for TimeZoneBcp47Id

type Container = ZeroVec<'a, TimeZoneBcp47Id>

The container that can be used with this type: ZeroVec or VarZeroVec.

type Slice = ZeroSlice<TimeZoneBcp47Id>

type GetType = TimeZoneBcp47Id

The type produced by Container::get()

type OwnedType = TimeZoneBcp47Id

The type produced by Container::replace() and Container::remove(), also used during deserialization. If Self is human readable serialized, deserializing to Self::OwnedType should produce the same value once passed through Self::owned_as_self()

impl Copy for TimeZoneBcp47Id

impl Eq for TimeZoneBcp47Id

impl StructuralPartialEq for TimeZoneBcp47Id